The semi -wet material crusher is a new type of single rotor reversible crusher. It has a strong adaptability to the moisture content of the material, especially for the fermented rotten garbage or other moisture -content ≤30%materials. The particle size of the powder can reach 20 ~ 30 mesh, which can meet the feed particle size requirements of general fertilizer -making equipment.
Principles of semi -wet material pieces:
1. The semi -wet material pieces are professional crushing equipment for professional crushing high humidity and multi -fiber substances. The semi -wet material crusher uses a high -speed rotating blade, and the crushing fiber is good. The semi -wet material crusher is mostly used in the production and processing of organic fertilizer, and the raw materials such as crushing chicken manure and humic acid have a good effect.
2. The semi -wet material crusher does not design the screen of the screen, and more than 100 kinds of materials can be crushed without blocking. Even the materials that are just fishing from the water can be crushed, and it will not be blocked by the crushing of wet material, causing burning the motor and affecting production.
3. The semi -wet material pieces are made of high -alloy wear -resistant hammer head. The hammer sheet is made of forging. It is particularly solid and wear -resistant. It is stronger than the ordinary hammer head.
4. The semi -wet material shredder uses a two -way gap technology. If the hammer is worn, it does not need to be repaired. The position of the moving hammer tablet can be continued to be used. The gap between the hammer head and the lining can control the granular size of the material.
5. The semi -wet material pieces use high -tech technology, which can be easily operated by only one person. Not only is the quality reliable and easy to repair.
6. The semi -wet material crusher concentrates the lubrication system oil. Under normal work, you can inject lubricating oil without stopping.
The semi -wet material crusher consists of the inlet bucket, body, rotor plate, sieve, stator plate, materials and other parts. The main axis of this machine is equipped with a rotor plate, a steel tooth and hammer piece on the rotor plate, and the crushing chamber is equipped with fixed steel teeth. The steel tooth and hammer tablets on the rotor disk are arranged with fixed steel teeth. When the main axis runs at high speed, the rotor plate also runs at the same time, and the material is thrown into the gap between the head. Under the comprehensive effects of mutual impact, cutting, and friction between materials and teeth or materials, it was crushed. Driven from the airflow, the crushed materials make the crusher along the outer edge of the rotor, and the strikes of continuous hammers, tooth plates, and sieve pieces are quickly crushed by collision and rubbing.
The semi -wet material crusher is equipped with a screen. The screen can be replaced according to the customer’s requirements. When the material is crushed to less than the diameter of the sieve, the effect of rotor centrifugal force is quickly came out of the screen through the sieve pores, and the discharge below is left below the discharge below. mouth. The coarse material continues to crush. The general material is collected by a cotton bag after crushing. The crushed materials are collected in the bag, and the air will come out of the small pores of the cloth bag. The size is determined by the sieve network with different goals.
Post time: Dec-20-2023
