The straw crusher can crush various raw materials, such as corn, sorghum, wheat straw, bean straw, corn stalks, corn cobs, peanut stalks, sweet potato stalks, peanut skins, dried weeds, dry cereal straw and other miscellaneous grains and dry materials, as well as After coarsely crushing cakes, etc., this series of crushers has a reasonable structure, is durable, safe and reliable, easy to install, easy to operate, and has low vibration. It is suitable for use alone or in conjunction with various feed mills.
Product structure and working principle; it can be matched with various forms of feeding structures, and the hammer blades are symmetrically arranged. When the crusher is working, the materials are evenly and appropriately fed into the crushing chamber from the feeding teeth in the feeding chamber. There are high-speed rotating hammers in the crushing chamber. The body is equipped with tooth plates. The added materials are strongly impacted and torn by the hammers. Due to the centrifugal force and the negative pressure in the lower chamber of the pulverizer, the finely crushed materials fall through the sieve holes into the lower chamber and are sucked away by the fan, and then sent to the centrifugal discharger by the fan. inside, or in the aggregate room.
The advantages of this new type of straw crusher: there are automatic feeding teeth similar to rotary tillage teeth in the feeding hopper. When the material enters the mouth of the hopper, the feeding teeth automatically push the materials into the crushing chamber. On the one hand, it improves the feeding efficiency. It saves time, effort and energy, and on the other hand ensures the safety of operators and makes production more humane. When the material enters the crushing chamber, the material is spread out under the action of the multi-knife operation. When the material reaches the size of the sieve hole, the material is automatically and instantly discharged from the outside of the machine body. This not only reduces the friction between the material and the blade, but also saves horsepower. The energy consumption is very low, so it meets the crushing requirements, with high output, low energy consumption, fast speed, and can be adjusted at will and automatically. The casing of this series of crushers is welded with high-quality steel and is strong and durable.
Working principle of straw crusher:
The straw crusher consists of a material-holding slide, a crushing chamber, and a conveyor device. There is a rotor in the crushing chamber, which is composed of a disc and a movable hammer. The screen and tooth plate are also the main working parts of the crusher. During operation, the processed materials enter the crushing chamber from the loading slide and are subject to repeated impact, friction and collision on the tooth plate by the high-speed rotating hammer, and are gradually crushed to the required particle size and leaked through the sieve holes. The leaked feed is sent to the polymer barrel through the conveyor fan and conveyor pipe, and is separated again in the polymer barrel. The powder is discharged from the bottom and bagged, and the air is discharged from the top.
Post time: Dec-13-2023
