Service life and daily maintenance of chicken manure organic fertilizer granulator

Service life and daily maintenance of chicken manure organic fertilizer granulator:
Everyone knows that the core of the organic fertilizer production line is the organic fertilizer granulator. As long as the organic fertilizer granulator runs smoothly, it is beneficial for producing organic fertilizer and other aspects. Everyone also knows that all machines have a service life. How long the organic fertilizer granulator can be used depends entirely on its maintenance. What we need to do is to extend the service life of the organic fertilizer granulator. Let me introduce it to you.
1. Operators should pay attention to regularly checking the parts that are susceptible to wear in the structure of the organic fertilizer granulator to observe whether its wear is not serious or very serious. If it belongs to the latter, it should be replaced immediately to prevent accidents caused by insisting on use.
2. For the bottom frame plane where the movable device is placed, pay attention to keeping it clean and remove dust and other objects in time to prevent the movable bearing from moving smoothly on the bottom frame when the equipment encounters materials that cannot be broken, thereby causing serious accidents.
3. During the operation of the organic fertilizer equipment, it was found that some installed wheel hoops are very easy to loosen, so they need to be checked frequently. In addition, once it is found that the bearing oil temperature rises too fast or there is an abnormal impact sound when the rotating gear is turned, the power should be turned off and stopped immediately, the cause should be checked and then solved specifically.
4. Good lubricating oil is very helpful for the life of bearings, so the operator should try to ensure that the injected lubricating oil is clean and well-sealed. The above four points are ways to extend the service life of organic fertilizer granulators. You need to understand them well. As long as you follow the precautions mentioned above, you will be able to effectively extend the service life of the granulator, so you should pay more attention to it during normal use.
1. Keep the workplace clean. After each test of organic fertilizer equipment, the residual mortar inside and outside the granulating leaves and granulating pot should be thoroughly removed, and the mortar and flying objects scattered or splashed on the organic fertilizer equipment should be cleaned. The exposed processing surface of the organic fertilizer equipment machine should be wiped clean, coated with anti-rust paint, and covered with corresponding protective covers to prevent dust from invading again.
2. The organic fertilizer equipment has no external refueling hole, and the gears and worm gears are lubricated with special butter for organic fertilizer equipment. The upper gear and the lower gear should be filled with three-pack grease once every season. When refueling, the gearbox cover and the transmission gear cover of the dynamic group can be opened respectively). The sliding surface of the support gearbox and the bracket hinge should be frequently dripped with engine oil for lubrication. The worm gearbox and bearings are filled with transmission butter when leaving the factory, but the gearbox machine should be thoroughly cleaned and all protective lubricants should be replaced after every year of use.
3. Always pay attention to the operation of the organic fertilizer equipment. There should be no serious abnormal noise, let alone metal friction sound. If an abnormality is found, it should be stopped immediately and checked. It can only be used after troubleshooting. If the corresponding cause is not found, the machine cannot be started. If there is a metal friction sound, check the gap between the organic fertilizer equipment first.
4. Check the standard gap between the organic fertilizer equipment frequently.
5. When repairing the organic fertilizer equipment, the working gap should be re-measured each time and adjusted several times. It can be used only after it meets the standard.
6. If the organic fertilizer equipment cannot operate when the program controller is pressed, check whether the power supply voltage, power plug socket, connection plug socket, etc. are normal, and check the internal fault of the controller.