Model and technical parameters of self-propelled compost turning machine

The self-propelled compost turner adopts a four-wheel walking design, which can move forward, reverse, and turn, and is controlled and driven by one person. During driving, the whole vehicle rides on the pre-stacked long strips of fertilizer base, and the rotating knife shaft mounted under the frame performs mixing, fluffing, and shifting of the fertilizer base raw materials, and becomes a new strip after the vehicle passes. shaped stacks. The machine can be used in the open outdoor field or in the workshop greenhouse.
Structural composition of walking type turner:
1. The pile turning machine adopts four-wheel self-propelled type, controlled by one person, and uses anti-skid tires. When walking, the whole vehicle rides on the strip pile, and a new strip pile is formed after the vehicle passes by. This machine can be used in various occasions .It also has a crushing function in the later stage of material fermentation. The overall structure is rigid, and the performance is safe and reliable.
2. The machine adopts a four-wheel walking design, which can move forward, reverse, and turn, and is controlled and driven by one person. During driving, the whole vehicle rides on the pre-stacked long strips of fertilizer base, and the rotating knife shaft mounted under the frame implements the mixing, fluffing, and shifting of the fertilizer base raw materials. shaped stacks. The operation can be carried out in the open field or in the workshop greenhouse.
3. A major technological breakthrough of this machine lies in the integration of the crushing function in the later stage of material fermentation. With the gradual dehydration of the material, the cutter shaft with the crushing device can effectively crush the plates formed by the fertilizer during the fermentation process, which not only saves a crusher, but also greatly improves the crushing efficiency, reduces the cost, and solves the problem. The problem that the production volume is restricted by the pulverizer is solved.
Requirements for the use of walking turners:
1. The ground of the walking type dumping airport must be flat and solid, and there must be no uneven surface greater than 50mm in the working area. The length is not limited, and the width should ensure that the machine can turn around.
2. The pile of raw manure to be turned must not exceed 2000mm in width and 800mm in height, and shall be piled up in strips and straight lines.